10 in Dual Slide Compound Miter Saw with Laser

Makita changes the game with the LS1016L 10? dual slide miter saw featuring a crown molding cutting capacity of 6-5/8? (nested) ? the largest in its class. It has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, and an exclusive 6 linear ball bearing design for ?dead-on? accurate cuts. The LS1016L has a 15 AMP direct gear box motor that never slips, bogs down, or requires maintenance like belt-driven saws. The soft start feature delivers smoother start-ups, and the Electronic Speed Control maintains constant speed under load for smoother, higher-quality cutting. The innovative direct drive gearbox and patented retractable guard system are engineered for increased vertical cutting capacity. At 6-5/8?, the LS1016L has the largest crown molding cutting capacity (nested) in its class. The patented retractable rear guard provides the LS1016L with 4-3/4? baseboard cutting capacity (vertical). The exclusive 6 linear ball bearing design delivers smooth, solid and adjustment-free ?dead-on? accurate cuts. The saw also has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts. The LS1016L is engineered for finish work, remodeling, trim work, and furniture making. It is ideal for finish carpenters, woodworkers and general contractors seeking a best-in-class 10? dual slide compound miter saw for the jobsite or on the bench top.

10 In. Compound Miter Saw

The DEWALT DW713 10 In. Compound Miter Saw has a stainless steel detent plate with 11 positive stops for repeatable accuracy and jobsite durability. The tall sliding fences support 4 1/2 In. crown molding vertically and slides out of the way for bevel cuts. With a miter detent override system, you can close in on your fine adjustments and precise miter angles.

10"" Compound Miter Saw

The Exactline laser alignment system allows the operator to easily align the blade with the cut line. The heavy duty 15 amp motor powers through the most difficult cuts. The sof-touch controls improve comfort and grip and the Repeat-A-Cut fence allows the user to mark the fence for repetitive cuts. The front mounted clamp securely holds material in place. Extended bevel and miter ranges 0 deg. to 48 deg. bevel and 0 deg. to 47 deg. miter capacities accommodate a wide variety of cuts. The left side table extension allows increased material support and the sliding left fence provides support for taller material and adjusts for bevel cuts. The 2-1/2 In. dust port provides connection to the standard dust collection systems to help keep work area clean.

12 In. (305mm) Double-Bevel Compound Miter Saw

15.0 Amp, 3,600 rpm motor provides extended power and durability while the adjustable stainless steel detent plate with 11 positive miter stops delivers repeatable accuracy and jobsite durability. Tall sliding fences support crown molding 6-5/8 In. nested and base molding 6-1/2 In. vertically against the fence while easily sliding out of the way for bevel cuts. Exclusive Back Fence Design delivers ability to cut 2 x 10 dimensional lumber at 90 degrees and 2 x 8 at 45. Cam lock miter handle with detent override deliver quick and accurate miter angles.

12 In. Laser Compound Miter Saw

The Exactline laser alignment system allows the operator to easily align the blade with the cut line. The heavy duty 15 amp motor powers through the most difficult cuts. The soft-touch controls improve comfort and grip and the Repeat-A-Cut fence allows the user to mark the fence for repetitive cuts. The front mounted clamp securely holds material in place. Extended bevel and miter ranges 3 deg. to 48 deg. bevel and 0 deg. to 47 deg. miter capacities accommodate a wide variety of cuts. The left side table extension allows increased material support and the sliding left fence provides support for taller material and adjusts for bevel cuts. The 2-1/2 In. dust port provides connection to the standard dust collection systems to help keep work area clean. Motor: 120 volt AC 15 amp, Motor Speed: 3600 rpm, Blade Arbor: 1 In.

Ace(r) Double Bevel Compound Miter Saw

10" 40T blade (fitted) 15.0 amp Work clamp Double bevel action improves efficiency Miter cuts 0 degrees to 52 degrees left and right, allowing a full range of miter cuts Positive miter table stops for fast convenient setting of miter cuts Bevel cutting 0 degrees to 45 degrees for a large range of bevel and compound miter cuts D-handle design with rubber grip for improved ergonomics and greater comfort Adjustable depth of cut permits trench cutting for greater versatility Dust bag Spindle lock button allows easy one wrench blade changes Lock down facility for portability and storage Carbide tipped saw blade stays sharper longer for an extended service life

Ace(r) Single Bevel Compound Miter Saw

10" 24T blade (fitted) 15.0 amp Dual rail slide Redeye laser line generator for improved operator cutting vision, faster set - up Miter cuts 0 degrees to 52 degrees left and right, allowing a full range of miter cuts Positive miter table stops for fast, convenient miter cuts Bevel cutting 0 degrees to 45 degrees enables a large range of bevel and compound miter cuts D-handle design with rubber grip for improved ergonomics and greater comfort Adjustable depth of cut permits trench cutting for greater versatility Dust extraction port for a cleaner and safer working environment Dust bag Lock-down facility for portability and ease of storage Carbide tipped saw blade stays sharper longer for an extended service life

Buffalo Tools 10 inch Compound Miter Saw - Fast FREE FedEx Shipping!

10 Compound miter saw 2 HP compound cutting action to 45 allows versatility in cutting angle -45 to +45 Deg. miter angle range Adjustable base cutting action Blade safety guard system Blade lock down facility LOWEST Price on the Web...Shipping is FREE ! BEST PRICE on the Web! FREE Shipping! FAST FedEx Service! QUESTIONS? Call us! 800-718-1710 This Buffalo Tools 10 inch Compound Miter Saw - Fast FREE FedEx Shipping! features 2 HP compound cutting action to 45 that allows versatility in cutting angle and -45 to +45 Degree miter angle range. It has adjustable base cutting action (bevels left or right), blade safety guard system, and blade lock down facility.   BONUS OFFER!  Get a $25 Rebate Coupon with ...click to read more about the Buffalo Tools 10 inch Compound Miter Saw - Fast FREE FedEx Shipping!!

DEWALT Double Bevel Compound Miter Saw 12" - 15 Amps - Model DW716

<

The DEWALT® Double-Bevel Compound Miter Saw features a powerful motor with innovative gearbox and belt-drive design to deliver increased vertical cutting capacity. The double bevel design allows saw to bevel 0° to 48° with positive stops at 0°, 33.9°, 45° and 48° both left and right. The exclusive back fence design lets you cut 2in. x 10in. dimensional lumber at 90° and 2in. x 8in. at 45°. Precise miter system and machined base fence support deliver increased cutting accuracy.

Product Features

• Adjustable stainless steel miter detent plate
• Tall sliding fences support crown molding up to 6 5/8in. nested and base molding up to 6 1/2in. vertically

Package Contains

• (1) Compound miter saw
• (1) Carbide blade
• (1) Blade wrench
• (1) Dust bag

Content Links

Product Specifications

Manufactured by

Dewalt Double Bevel Sliding Compound Miter Saw

Dewalt Double-Bevel Sliding Compound Miter Saw

DEWALT Heavy Duty Double Bevel Sliding Compound Miter Saw 10" - Model DW717

<

The DEWALT® 10in. Compound Miter Saw is built for heavy-duty use at home or on the job site. 15 Amp motor provides long life and power for all cutting applications. Large vertical capacity for right and left miter cuts.

Product Features

• Adjustable stainless steel miter detent plate with 7 positive stops
• Optimizes cutting accuracy
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Dual horizontal steel rails with linear ball bearing for consistent accurate cuts
• Exclusive cross cut stop positions cutting head for maximum vertical cut capacity
• Cross cut capacity: 12in. at 45° angle using back fence
• Vertical cut capacity nested crown up to 6 1/4in.
• Tall sliding fence supports up to 6in. base molding to the left of blade & up to 3 1/2in. to the right of the blade
• Miter capacity: left 60° and right 52° for greater versatility
• Bevels 0–480 for increased cut capacity
• Cam Lock miter handle provides fast locking action of miter table
• Horizontal ergonomic handle provides increased comfort
• Lightweight with built-in carrying handle for easy portability

Package Contains

• (1) Compound miter saw
• (1) Carbide blade
• (1) Blade wrench
• (1) Dust bag
• (1) Vertical material clamp

Content Links

Product Specifications

Manufactured by